HOW-TO VIDEOS

In this video we show you how we typically mount Boogey Lights® LED light strips to the bottom of an RV or trailer. Essentially any vehicle that has a continuous mounting surface. Works well for all RVs, cargo trailers, food trucks, food trailers, cargo vans, pickup trucks and cars. The Plastic L-Channel is 2" x .5" x .125" thick. Rivets are 1/8" x 1/4" (4-4) or 1/8" x 5/16" (4-5) depending on the material we're mounting the L Channel to. Rivets are large flange rivets. We also use 1/4" and 3/8" split loom to wrap the power lead wire.

 

In this video we walk you through the installation of a RGBWW Multi-Color Awning Light kit on a new 2020 travel trailer. In this particular installation the customer wanted to use their existing OEM internal awning light switch to light just the Warm White + Bright White diodes in the RGBWW led strip. Doing so gives them the ability to have a bright white light under their awning using their existing switch (on/off). Then, we wired the RED, GREEN and BLUE diodes in the RGBWW led strip to a Boogey Lights RF + Bluetooth RGB LED controller. This gives them the abilty to change colors, flash, strobe and all the other features using either the included RF wireless remote or their Bluetooth enabled smartphone.

In this video we walk you through the installation of an RGB Multi-Color Under-Glow LED Light kit on a new 2020 travel trailer. In this particular installation we also installed an awning light for the customer as well.

In this video we walk you through the installation of an RGB LED Awning Light and RGB controller on a SLIDE OUT.

In this video we discuss the different options for creating mounting surfaces for your Boogey Lights. For all of our in-house installations, we either use aluminum flat-stock, angled aluminum or both. By creating a flat smooth mounting surface for your lights, you'll ensure they last for years. BTW - you can usually purchase this aluminum flat-stock (or angle) locally. We also offer it for sale on our website.

What's involved in connecting BOOGEY LIGHTS LEDs to your truck's tail-turn-brake light system.

In this video we show you a recent installation on a 2015 VNL 780. We installed our UNDER-CAB, GRILL and AIR VENT light kits along with our DUAL ZONE Heavy Duty LED Controller. We prepped the controller for hooking up to our UNDER-GLOW and REAR FAIRING ACCENT LIGHT KIT which we'll have in another video.

In this video we discuss how to install the Boogey Lights ROCK GUARD Light Kit. We have two ways of mounting this kit: either on top of the rock guard itself or on top of the chrome lettering. We prefer on top of the chrome lettering as it provides the best lighting effect.

In this video we discuss how to install Boogey Lights on a Club Car 4 Seater Golf Cart. Follow along as we go over placement of the LED strip lights, how-to run your wires and where to mount the controller module.

In this video we show you a recent installation we did where we installed Boogey Lights on top and under-neath the passenger side slide-outs and connected them to the same controller. It's a detailed installation that takes time but we hink the end result is worth it.

Here's a travel trailer awning light installation.

1997 Sea Ray Signature 210 Installation.

In this video we demonstrate how to use the BOOGEY LIGHTS® GEN1 (G1) Smart Phone APP using a Boogey Lights single zone LED controller.

In this video we demonstrate how to use the BOOGEY LIGHTS® GEN1 Smart Phone APP with the Boogey Lights DUAL ZONE LED controller.

In this video we demonstrate how to use the BOOGEY LIGHTS® GEN2 (G2) Smart Phone APP for both single zone and dual zone controllers.

In this video we discuss how to properly mount our LED strips on coroplast (or similar surfaces) so they don't fail.

In this video we share a few of our favorite tips and tricks to make sure your under-glow installation is the best it can be. We include some commentary on using Buytl Tape to secure the end of each LED strip, using right angle aluminum bars to create a mounting surface for a 7.5" led strip across the front of your RV and how to use 3M VHB tape (with 3M adhesion primer) to secure power leads down the full length of your RV without drilling into the bottom.

We get a lot of questions about how to install an awning light if the length is longer than 16 feet. While most customers will simply center the standard 16' long LED strip, there are some who want complete coverage for the entire awning length. In this video we show you how we installed a 16' LED strip along with a 3' LED strip to cover the full 19' length of this awning. We also show you how we tied in the existing OEM on/off wall switch such that when the wall switch is turned on, the RGB led strips display white just like the original single color awning light did. And when the wall switch is off, you can use the LED controller and wireless remote (or bluetooth APP) to change colors.

Boogey Lights® controllers and M7 wireless remotes come already paired with each other. If however you need to pair your M7 wireless remote control to the Boogey Lights® controller, here's a video to assist.

Boogey Lights® controllers and wireless remotes come already paired with each other. If however you need to pair your KEY FOB wireless remote control to the Boogey Lights® controller, here's a video to assist.

In this video we show you how to test your voltage.

In this video we show you how to bench test your led strips.

In this video we introduce our Rock Guard Light Kit which integrates both with the existing Boogey Lights under-glow lights along with the motorhome's brake, tail and turn lights.

In this video we walk you through a Boogey Lights installation on a food truck.

In this video we walk you through a Boogey Lights installation on this 1995 Prevost Country Coach

In this RVH Lifestyles video you'll see Boogey Lights installed on a Semi-Truck.

In this video we show you 113' of Boogey Lights on a 2014 Fleetwood Providence.

In this video we show you a 2011 International Prostar with Boogey Lights installed.

Boogey Lights Installation | 2017 Jeep Rubicon

Boogey Lights Installation | 2021 Dodge Hellcat Redeye

Boogey Lights Installation | 2020 Cherokee Wolfpack Limited

Boogey Lights Installation | 1994 Chevrolet Silverado 1500.

Boogey Lights Installation | Front Z-Bar.

Boogey Lights Installation | 2010 Tiffin Zephyr.

Boogey Lights installed on a Jet airplane. This installation has our single zone heavy duty LED controller with our LED strips mounted inside our Mini T12 Aluminum Channels with Diffuser on top to make for a professional installation. All 12vdc.